EZCAD Laser Marking Station 2XCOM RS232 Serial Port For Fiber Machine
Description
Laser Marking Controller
EZCAD Laser Marking Station 2XCOM RS232 Serial Port For Fiber Machine
Laser marking station could works with our ezcad3 command, and this function is good for production line, you can control ezcad3 start mark by TCP command, it is very useful. Until now, we have 17 different commands for ezcad3, you can load file, save file, send mark data, change position of the project, move axis, homing, etc. The improtant is we can add the new command to ezcad3 if it is a great idea. The laser marking station combine our DLC card with PC, so you just need a monitor, it will works, and you can use one TCP program control different laser marking station, there no limit, you can control 100 or 1000, just send command by TCP communication.
Parameters
| Memory | 4G |
| USB 3.0 | 4 USB Com |
| PCI | PCI x 1, PCIe x1V |
| Serial Port | 2XCOM,RS232 |
| Storage | 64GB,MSATA |
| Operating System | Win10, 64Bit |
| LAN | 2 x 10/ 100/1000M |
| CPU | CORE i3- 6100, 3.7G, TDP 51W |
Laser Marking Board Parameters
| Scanner Type | Galvo With XY2-100 Interface Support 16bit/18bit Galvo |
| Input Signal | 10 input |
| Output Signal | 8 output |
| Communication Interface | USB 2.0 |
| Operation System | Win 10 64bit |
| Software | EZCAD3 |
| Support Laser Source | CO2,Fiber,UV,SPI,QCW,YAG |
| Extended axis | 4 axis |